New technology inside our LITTLEmack provides:
Better-than-ever digital sound
40% more recording time
25% more battery life
One-shot timer prevents message repetition when a user continually activates a switch
It now has 2 minutes of recording time
FREE toy/appliance cable
FREE Snap Switch Cap
2.5″ message area
EASY to record
Angled base for easy access
1 x 9V battery included
This enables the user to control a battery- or electrically-operated toy or appliance allowing voice output to be paired with an activity. The cable, which is included, has a 1/8″ (3.5mm) plug on both ends. One end is plugged into the Communicator Toy/Appliance Jack (TOY/APPL.) and the other into a battery device adapter, a Switch Latch and Timer, or a control unit such as a PowerLink.
The Toy/Appliance Jack operates only when a message has been recorded into the Communicator and will activate the item only while the message is played.
Activating battery-operated devices
A battery-operated toy or appliance may be attached directly to Communicators via a battery device adapter. Using this direct connection, the toy or appliance will be activated for the length of the message. If you wish to extend the action beyond the length of the message, simply connect the Toy/Appliance Jack to a Switch Latch and Timer and choose the Latch or Timed mode of control.
Activating Electrical Devices via PowerLink Control Unit
When you want to use a Communicator to activate, and comment about, an electrically-operated appliance, toy or game, connect it to a PowerLink control unit (or another control unit) by plugging the cable into the switch input jack on the control unit.
Using external switches
Any switch with a 1/8″ (3.5mm) plug or 1/8 mono plug adapter can be used to activate the Communicators by plugging it into the external Switch jack on the side of them. The user will then be able to activate them with either the external switch or the surface of the Communicator.
Please note: the LITTLEmack is a communicator and not a switch.